JUKI RS-1 is new High-speed SMT Pick and Place Machine,Equipped with a newly developed parallel 8 nozzle head, the JUKI SMT Pick and Place Machine is capable of mounting a wide variety of parts and improving the mounting speed by up to 70%.Board size50×50mm~650×370mm(Single clamping)Component height25mmComponent size0201※~□74mm/50×150mmPlacement accuracy±0.035mm(Cpk≥1)Feeder inputsmax.112(Using RF feeders)Placement speedOptimum 42,000CPHConveyor specificationstandard

JUKI Placement machine from RS-1 start,After repeated testing and testing technology,Further innovation has been achieved on the basis of the original 1. Faster minimum chip assembly The maximum size is 50*150mm or 74mm Square component with side length ,Yes RS-1R The chassis has been completely redesigned,Especially its unique Takumi The head covers more different component heights,Further realized the decisive speed advantage.2. 360 Degree visualization component identification allows users to safely detect specific polarity markers.In nozzle RFID integrate,Fully traceable with components and circuit boards.Parameter specification PCB size650*370 mmMinimum element0201~74 mmFlying station112 individualSubstrate sizeStandard substrate 650*370 mm Double splint 1200*370 mm Mounting element height 25mmMounting element sizeLaser recognition 0201 British system008004 chip~74mm/ 50*150 mmimage recognition Matching 3 species 10mm 27mm 54mm Standard camera 3mm~74mm Square Element ,or 50*150mmPrecision camera 1.0*0.5mm~48mm,or24*72mmMounting speedoptimum condition 0.0857 second/chip 47000 CPH Mounting accuracyLaser recognition ±0.035mmimage recognition ±0.03mmType of mounting elementmost 112 species Converted into8mm Device size W*D*H Standard substrate 1550*1810*1440mmUnit weightabout 1770KGMachine characteristics Newly developed tip head unit Takumi Head unit According to corresponding components,Identification of a new mounted patch head unit with changeable position High speed chip and universal functions The head unit is closer to the substrate,The absorption time is short,Fast lifting speed Optimum carrying speed 47000CPH,Realize high speed carrying The best line balance to achieve the highest production.

JUKI Multi task platform JM-100 The characteristics are as follows 1. new Takumi Head It has a variety of high recognition 2. Optimal boarding speed Component insertion time reduced to 0.6 Second vacuum nozzle and 0.8 Second clamping nozzle 3. utilize JaNets Software for line control.Product specifications JUKI Multi task platform JM-100Standard specifications Lsize PWB Clinical specifications Lsize PWB Use locking unitNot applicable to locking unitBoard size1 Secondary clamping50x50mm~410x360mm80x100mm~410x360mm80x50mm~410x360mm2 Secondary clamping50x50mm~800x360mm80x100mm~800x360mm80x100mm~800x360mmPCB weightMaximum 4 kgModule heightMaximum 30mmComponent sizeLaser recognition0603～□50mmVisual recognition□3mm～□50mmInsertion speed Insert component vacuum0.6 sec/part*1*3*4Gripping degree0.8 sec/part*2*3*4Placement accuracy SMT Laser recognition±0.05mm 3σ Visual recognition±0.04mmSpecifications and conditions 1. Applicable part Aluminum electrolytic capacitor φ 8mm) Feeder 2 individual MRF-S Placement conditions Pick at the same time,Sequential insertion 2 A suction nozzle 2. Board transfer and mark identification times are not included 3. Part height is 16mm Time.